CNC Final Tile

Fusion Prep:
(Note total time for the cut is 3hrs 37min).
Video of Simulation:

Woodshop CNC:
Changed the bit (it was very sharp), then placed the piece and centered the bit.
Big thanks to Amanda for helping me out on this one!
checking z
ran into an error, asked for help! Thanks Bryan!
started cutting
peaced out "brb cnc".

Check up - part-way through, looking good!!


Went back to check on it at 5:09pm... WOODSHOP CLOSED at 5 not 7!!!! WHY?? The woodshop ours online AND on the wall are the same... open till 7pm.

I assume they stopped power.... I guess we till discover how the final piece looks tomorrow in the next blog post.

Comments

Post a Comment

Popular posts from this blog

5. Parametric Surface Design: Progress Part 2

Image
I made 2 versions of the tile that I'm happy with: Version 1: Glitchy Palm Leafs based off the progress from last blog post Version 2: Smooth Interlocks The building process: used pipe first, it didn't work. Then I remembered sweep! It worked but it was broken (red), I think its because one ring didn't show up at this radius. So I cheated a little and copied one into place in rhino after it was baked. Made sure it fit in the bounding box more clean up in rhino, deleting extra bits and booleaning this thing into existence. Doing unions in grasshopper kept causing crashes so I did it after the bake.  It fits in the bounding box! Grasshopper Code: Tile:
Read more

3. Parametric Identity: Plotter Drawing

Image
Islamic Parametric Patterns Mannnnnn this 12 Noon Thursday deadline always catches me off guard! I want to take this project further before class on Friday, so stay tuned.  For now, I'll present what I managed to complete so far using the Parametric design from my previous blog: (Scroll to the bottom to see Part 2 - attempting the drawing again) As you can see, I printed all 3 iterations on one long piece of mylar with a gold pen (the type that writes when pushed down). I wanted to make something that couldn't be done with a traditional printer and  I thought the gold and mylar would be a fun experiment - I think it makes the final piece feel valuable and ephemeral.  The mylar was a bit thin and did warp a bit, there's also a roller impression mark on the one side... but it worked!  The clip above shows each design in a bit more detail. I think the idea of iteration works really well here. Adding depth as one 'levels up' in life. I gue...
Read more

Doorknob Attempt 2

Image
Home Depot Knob Kit Measurements: Re-modelling with the new modular approach:  Prepping for 3D Print:  (approach without support material was selected) 3D Print + Assembly:  Final: Push can only be pushed, pull can be pulled and signifies that with how it can be grasped. Hopefully this can change the mental model of what we do with a door knob - clear signifiers exist without type to indicate the action needed-  oh, and smooth design minimizes clothes catching. They should be flush to the door though - that would be what I change for the next iteration.  Reflection:      I'm really glad I attempted this project again. I feel like I built one solution to a real-world problem. The new push knob is much more cohesive with the pull design and I'm glad the assembly was a more appropriate joining with the home depot kit. It's not perfect, I would like it to be more seamless and I really wanted to use screw-joints... but I'll have ...
Read more